An ultra-complete kit
This complete kit contains :
- 7 inch LED screen
- Adjustable support (with its fixing adhesive)
- 3 white Micro cameras 4 IR LEDs with night vision
- 15 meter shielded cable, 4 pin connector - 3 shielded cables of 5 meters- 1 rear camera on bracket 178 IR LEDs with night vision- 1 Steel bracket- 1 Plastic cap1 QUAD screen to view 4 cameras
The screen of the Beeper RW4QUAD will allow you to view up to 4 cameras at the same time. One rearview camera and 3 small side cameras.
Installation of the screen
Installation of the camera
Vision in reversing video :
In case of use in reversing video, make sure to connect your product to a +12/24V reversing light. In this case, the product will activate automatically as soon as the reverse gear is engaged.
Vision in retrovision :
In case of use in surveillance, make sure to connect your product to a +12/24V after-contact. In this case, the product will be activated as soon as the vehicle is switched on.
Optimal vision, even at night
The cameras in the Beeper RW4QUAD kit are equipped with 18 infrared LEDs at the rear and 4 infrared LEDs on the sides, which have the ability to detect the level of light, thus making it possible to provide the best possible night vision.
Please note that the operation of the LEDs is not perceptible to the naked eye.
These LEDs are a real asset for night vision, but they can sometimes distort the real colours of surrounding objects or obstacles (e.g. pinky vegetation). However, this constraint remains negligible compared to the overall performance of the product.
Template lines
Distance visualization template lines appear on the screen, which allow the best evaluation of the distances between the vehicle and the obstacle. These template lines can be deactivated when the product is installed if desired.
Dimensions
WARNING • VEHICLES THAT DO NOT ALLOW AN APPLIANCE TO BE CONNECTED TO THE REVERSING LIGHT HARNESSOn certain vehicles the +12 V reversing light is interfered with when the engine is running which can disturb the correct operation of the reversing radar kit. In other cases, this +12 V reversing Light does not allow any additional appliance. For all these vehicles, Beeper has developed the RCANR2 module in order to retrieve the +12V Reversing Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and provides a +12V Reversing Light for the connection of a reversing camera. You will find this RCANR2 canbus module by clicking HEREThe Beeper RW4QUAD is of course a complete kit, delivered with all the accessories necessary for the assembly, as well as a simple and clear assembly instructions.