Front radar 4 sensors with buzzer • RE01AV/4

A simple and discreet installation

The BEEPER FRONT RADAR system (ref: RE01AV/4) is 100% universal, it is compatible with all market vehicles. The sensors can be painted to blend in with the bumper. The front detection activates automatically as soon as the brake pedal is pressed and is timed for 10 seconds : when you park your vehicle in forward gear (e.g. in diagonal), any front impact is avoided.

It is possible to deactivate the front sensors thanks to a switch supplied in the kit to avoid untimely triggering. Indeed, at high speed the front radar can consider rain, snow or hail... as an obstacle. This is why this switch makes it possible to cut the front radar and to avoid these untimely releases.

Kit composition

- A central unit with integrated buzzer
- 8 cables of 3m
- 4 sensors (The sensors can be covered with a veil of paint for a perfect finish.)
- A switch
- Drilling tool

Main functions 

- Front detection from 0.8m to 0.3m
- 4 ultrasonic sensors
- Alerte sonore par bips (60dB)
- Switch provided for radar activation & deactivation
- 12V power supply
- Drilling tool supplied

Detection distances

The sensors of the Beeper RE01AV/4 kit ensure detection from 80cm to 30cm.

Installation of sensors 

The sensors should be placed at least 50cm above the ground. Indeed, sensors placed lower will detect the ground, which will cause untimely triggers. 

If you have a commercial vehicle, sports car or other vehicle with a lowered bumper, we have a solution for you. You have the possibility to order specific angled sensors that allow a lower installation; at 43cm from the ground. Access to the product sheet by clicking HERE.

The sensors can be covered with a veil of paint for a perfect finish. 

The BEEPER RE01AV/4 is of course a complete kit, delivered with all the accessories necessary for the assembly, as well as a simple and clear assembly instructions.