Universal car alarm for convertible • XR5CAB

The BEEPER XRAY XR5CAB car alarm is an alarm specialized in convertible protection. It is a simple and efficient system. The communication between the different elements is done by radio transmission RFID (Radio Frequency Identification) which allows the installation of a complete system with only 2 wires.

The Beeper XRAY XR5CAB is therefore 100% universal and 100% safe for your vehicle.

The BEEPER XRAY XR5CAB is the first automotive system to allow FULL COMPATIBILITY with multiplexed systems. The only connection required for its operation is the power supply for the siren, which can be taken directly from the battery or from the passenger compartment.

Compatibility

Most European vehicles produced after 2001 incorporate a multiplexed electrical network (CANBUS, VAN, etc.). This means that a single cable of the electrical network can contain multiple information thanks to a specific coding of the data in transit. The BEEPER XRAY XR5CAB is a 100% universal kit, which means that it can be easily installed on all types of multiplexed vehicles as well as on all older vehicles. 

Easy installation

Connecting the BEEPER XRAY XR5CAB car alarm is simple and takes only 30 minutes. Simply connect the two wires of the siren to your vehicle's battery and then connect the hyperfrequency sensor to a permanent + 12V and a ground (-).  

Innovation

The technology developed for the Beeper XRAY XR5CAB is Radio Frequency IDentification (RFID) which allows for wireless transmission of data between the different elements of the system and automatic recognition between them. In the vicinity of the vehicle, the XRAY remote control will be automatically recognised by the central, so there is no need to press the button on the remote control.
The system will activate and deactivate itself within a radius of 10 m.

Main functions

- 100% compatible with multiplexed vehicles
- 2 RFID remote controls 
- Hyperfrequency sensor 
- Shock sensor teleadjustable on 8 levels
- Ejectable current consumption sensor 
- Radio coded siren (wireless) 118 dB
- Installation in 30 min 
- 100% universal  

Composition 

 Siren and central 2 in 1

- Central allowing to come and connect the different modules of the alarm. 
- Siren with a power of 118db
- 2 wires to connect : 
red wire (+) 12V permanent battery
black wire (-) battery ground

   2 Remote controls

- mono directional function 
- automatic activation/deactivation function (hands-free access)
- 2 CR 2032 flat batteries (supplied) per remote control
- Alarm memory :
On deactivation, if the siren beeps 4 times, the system has registered that the system has been triggered in advance. 

Hyper frequency sensor 

The hyper frequency sensor is particularly suitable for the protection of convertibles or open volumes. It allows to detect a movement in an open volume within a defined perimeter, e.g. an arm entering the field will be detected. It can also be used for large closed volumes (e.g. commercial vehicles).
The sensor should be positioned in the centre of the vehicle, if possible under the central console. The hyper frequency signal is emitted from the sensor in the form of a half-sphere.
Note that the sensitivity of the sensor can be adjusted using the potentiometer.

The XR5CAB alarm is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear assembly instructions.